Click image to view full size image
Red PTFE Teflon Tube , Teflon PTFE Shrink Tubing For Protecting
Quick Detail:
1.Continuous operating temperature -454°F to 500°F (-270°C to 260°C)
2.Outstanding resistance to almost any chemical known
3.Very low coefficient of friction
4.Good dielectric strength
5.Limiting Oxygen Index greater than 95
6.ETO and autoclave sterilizable
7.Flat and tidy surface, no defects, crevices and separations
8.Low minimum order quantity
9.Good services
Description:
PTFE Teflon Shrink Tubing is available in 2:1 and 4:1 shrink ratios, and is widely used in military
applications because of its high continuous use temperature (250°C), and outstanding chemical
resistance.
PTFE Teflon Shrink Tubing is the most difficult of the three fluoropolymer materials to shrink due to
its extremely high shrinking temperature (325-340°C). You can use a heat gun or welding torch to
shrink PTFE, but these methods have a tendency to cause the material to overheat in small areas,
while under-heating other areas, causing uneven shrinking and potential burning of the material.
The most reliable method for shrinking PTFE Teflon is the use of a controlled temperature oven;
however this is impractical with large harnesses or temperature sensitive components.
PTFE heat-shrink sleeves are made from pure virgin PTFE with no fillers or additives and therefore
